Echometer
Menu
  1. Home
  2. Products
    1. Wireless Well Analysis Equipment
    2. Remote Asset Monitor (RAM)
    3. Wired Well Analyzer (Model E)
    4. Wireless and Wired Gas Guns
    5. Pressure and Load Cell Transducers
    6. Model M Strip Chart Recorder
    7. Gas Separators
  3. Software
    1. Total Asset Monitor 1.9
    2. Total Well Management
    3. AWP Download
    4. QRod
    5. Gas Separator Simulator
  4. Support
    1. Quick Refs
    2. How-To's
    3. Tech Notes
    4. Maintenance Guides
    5. Manuals
    6. Well Analyzer License Utility
    7. Repairs
    8. Online Seminars
    9. Gas Separator
  5. Ask Echometer
  6. Technical Papers
  7. Training
User Menu Search
Close

Search

Search
Close

Total Asset Monitor (TAM) 1.7

TAM 1.7.41 Release with Plunger Tracking Software Feature

 

  • FEATURES:

     

    • Plunger Tracking Analysis
    • Plunger Tracking Acquisition (*A Plunger Lift license is required with the Wired Well Analyzer and Wireless system to acquire Plunger Lift data.)
      1. ONCE THIS VERSION HAS BEEN INSTALLED AND SENSORS HAVE HAD FIRMWARE UPDATES, PREVIOUS VERSIONS OF TAM CANNOT BE USED.
      2. Please close out all programs prior to installing TAM 1.7 Release.
      3. Some companies have security features and restrictions in place on company laptops. It may be necessary for you to obtain administrative rights over the security on your computer, or you may need to have your IT department install TAM so they may override or disable security restrictions. 
      4. After installing TAM 1.7, plug in the Base Station and update the firmware if prompted. Once the Base Station is updated, turn on one sensor at a time and update the firmware on each sensor individually when prompted. Do not turn all sensors on at the same time for the initial firmware update. In the event of a failed Base Station update, please follow the Steps to Reset a Base Station. 
      5. Data sets acquired with TAM 1.7 or previously analyzed with TAM 1.7 cannot be opened by previous versions of TAM (i.e. TAM 1.4 or TAM 1.6).
      6. Please make sure all individuals who will be viewing data acquired or previously analyzed with TAM 1.7 update to the latest version. 
      7. Please contact Echometer with any questions, problems, or concerns with TAM 1.7 at info@echometer.com or (940) 767-4334 and speak to someone in Tech Support. 

​Download TAM 1.7 Release Dated 05-10-2018 with Plunger Lift for 32 and 64-bit (*Note: Windows XP is not supported)

  • To install the TAM Patch related to the Windows 10 update please download and install: TAM Patch Installer 1.7.42 dated 03-18-2021. Call Echometer Technical Support line for assistance (940) 767-4334.

*A license must be purchased to acquire data with a well analyzer in TAM. For more information, email info@echometer.com or call (940) 767-4334.

 

Terms Of UsePrivacy StatementCopyright 2011 by Echometer
Back To Top