Echometer
Close

Pressure Transducer

 

The Pressure Transducer has a rugged design and is accurate over a wide range of temperatures.

FEATURES

SPEC

  • Built-in thermistor that measures transducer temperature
  • All pressure measurements temperature compensated
  • Fitting is o-ring sealed so that hand-tightening is sufficient to prevent leakage
  • Waterproof pressure transient cable and pressure transducer connectors
  • 1" O.D. x 5"
  • Rated at 1.500 PSI
  • Available in ranges of 375, 1500, and 6000 PSI. (Higher than 6000 PSI available by special order)

The pressure transducer utilizes thin film sensor stainless steel diaphragm technology. This common type of transducer is rugged and offers good accuracy over a wide range of temperatures when temperature compensated. The pressure transducer also houses a thermistor that measures transducer temperature. All pressure measurements are temperature compensated. The pressure transducer is calibrated over a range of -40°F to 140°F. The temperature corrections are automatically applied by software.

The pressure transducer is a rugged device. The dimensions are 1" O.D. x 5" in length. It can be easily attached to the gas gun special connector or to a special connector that can be made to customer's specifications. The fitting is o-ring sealed so that hand-tight is sufficient to prevent leakage. The pressure transient cable and pressure transducer connectors are waterproof.

The pressure transducer is originally calibrated over a wide temperature range and these coefficients are permanently placed onto the pressure transducer label and used in software calculations. The pressure transducer can be easily re-zeroed at the beginning of each test. The pressure transducer and associated electronics have stability for measurement of better than 0.1-PSI resolution with a pressure transducer having a rating of 1,500 PSI. Even better resolution is available with a variety of lower range transducers. Accurate resolution of the pressure transducer is necessary in the measurement of the casing pressure buildup rate. A casing pressure buildup rate of a few 10ths of a PSI over a period of a few minutes is mandatory for proper analysis of the casing annulus gas flow rate and gradient of the gaseous liquid column.

The pressure transducers are available in ranges of 375, 1500, and 6000 PSI. Pressure transducers with pressure ratings higher than 6000 PSI are available by special order. The 1500 PSI range is normally supplied with the Well Analyzer unless the customer requests a different range. 

Download the Pressure Transducer Preventive Maintenance Guide.

Terms Of UsePrivacy StatementCopyright 2011 by Echometer
Back To Top
escort antalya
kadikoy escort pendik escort
ataşehir escort sultanbeyli escort
erotik film izle Rus escort gaziantep rus escort
canlı casino
bodrum escort
mobileidn.com
antalya escort
atasehir eskort bahcelievler escort alanya escort atasehir escort
gaziantep escort
gaziantep escort
escort alanya
royalbeto.com betwildw.com aalobet.com trendbet giriş megaparibet.com
holiganbet
Antalya Escort/
Dad double team partner's daughter and ' companion's daughters Do As Perky Latina gf pov fucked outdoors Elsa and Chloe eat each others wet cunt
deneme bonusu veren siteler
bonus veren siteler bonus veren siteler
betexper betexper betexper vdcasino canlı casino siteleri
deneme bonusu veren siteler deneme bonusu veren siteler
z library replika ai nudes
Kaçak İddaa Siteleri
deneme bonusu veren siteler
deneme bonusu veren siteler
deneme bonusu veren siteler 2024 deneme bonusu veren siteler
deneme bonusu
deneme bonusu
casino siteleri
casibom
güvenilir casino siteleri
deneme bonusu veren siteler
casibom giriş
casibom güncel giriş
jojobet
deneme bonusu veren siteler
deneme bonusu veren siteler
beylikdüzü escort